The unique cylindrical subwoofers PC-2000 and PC 4000 is good not only for their design, although this is a valuable property, not many are also ready to sacrifice the interior in the name of some kind of "black obelisk". Due to its compact vertical form factor, it can be placed almost anywhere in the room, and the processor's capabilities allow you to neutralize the negative aspects of an installation that is not the most logical from the point of view of acoustics. It guarantees convincing performance even in a fairly large-scale home theater while keeping the audience focused solely on the film, rather than on the dwellings of technology in the living space.
SvS PC-2000 vs PC-4000
SvS PC-2000
©: SVSSOUND |
The subwoofer is built around a 12-inch ventilated driver with an aluminum cone and double magnet in a cast aluminum frame with a patented geometry that provides "flawless piston movement". The subwoofer is equipped with a Power Sledge STA-550D class D amplifier based on discrete MOSFETs in the output stage. The manufacturer speaks of high currents and over 1,500 watts of peak power with "incredibly low distortion."
©: SVSSOUND |
The signal for the amplifier is processed by a 50MHz DSP with 56-bit filtering. Available not only for Apple iOS and Android devices but also on Amazon devices, the SVS Subwoofer DSP Smartphone app is designed to wirelessly control the 2000 Pro Series subwoofers. Provides volume control, customization, and selection of user preset, 3-band parametric equalizer, low-pass filter, phase adjustment, polarity, room correction, port settings.
©: SVSSOUND |
In addition, the rear panel of the amplifier houses the buttons and an Intelligent Control Interface (ICI) LED panel, first introduced on the 3000 SVS series of subwoofers. ICI also allows you to control volume, phase, and other system parameters.
©: SVSSOUND |
SVS PC-2000 Pro Features
- Cylindrical bass reflex active subwoofer
- The bass reflex port is located at the rear
- Speaker points towards the floor
- Durable subwoofer body made of Medium Density Panel (MDF)
- LF cone (305 mm) is made of pressed cellulose on a wide suspension with a double magnetic system
- The 2-layer voice coil, high power flat aluminum cable winding on the back.
- Control is carried out using the Apple® and Android® applications installed on your smartphone/tablet
- Built-in Class D amplifier features MOSFET output stages delivering staggering, continuous 550W or more than 1500W peak
- Analog Devices' 50 MHz high-resolution DSP processor with 56-bit filtering for ultra-precise audio reproduction
- Custom EQ and DSP settings tuned specifically for sealed cabinet design
- Unbalanced RCA and LFE
- Unbalanced RCA
- Trigger input 3 V. - 12V to turn on / off the subwoofer from another component such as an AV receiver or pre-amplifier
- Main power switch
- Detachable power cord
- Protective metal mesh grill
- Special foot pads that dampen vibrations and harmful noise are included in the scope of delivery
- Finish: black piano lacquer
Main characteristics SVS pc 2000
The new active subwoofer SVS PC-2000 Pro is manufactured in a cylindrical bass-reflex case. The PC-2000 Pro is equipped with a 305mm long-travel compressed cellulose woofer with a wide rubber surround directed to the floor. Built-in Class D amplifier power: 550W continuous /> 1500W peak. The subwoofer is controlled using the installed application via Bluetooth. Dimensions (WxH): 422 mm x 872 mm. Color: black piano lacquer.
SvS PC-4000
©: SVSSOUND |
©: SVSSOUND |
SVS PC-4000 Features
- Cylindrical bass reflex active subwoofer
- Speaker points towards the floor
- Durable subwoofer body made of Medium Density Panel (MDF)
- LF cone (343 mm) is made of pressed cellulose on a wide suspension with a double magnetic system
- The 8-layer voice coil, high power flat aluminum cable winding on the back.
- Control is carried out using the Apple® and Android® applications installed on your smartphone/tablet
- Remote control
- Built-in Class D amplifier features MOSFET output stages delivering staggering, continuous 1200W or 4000W peak power
- Analog Devices' 50 MHz high-resolution DSP processor with 56-bit filtering for ultra-precise audio reproduction
- Custom EQ and DSP settings tuned specifically for sealed cabinet design
- Convenient front display with subwoofer controls and 8-digit LED display
- Unbalanced RCA and balanced XLR line / LFE inputs
- Unbalanced RCA and balanced XLR line outputs
- Trigger input 3 V. - 12V to turn on / off the subwoofer from another component such as an AV receiver or pre-amplifier
- Main power switch
- Detachable power cord
- Protective metal mesh grill
- Special foot pads that dampen vibrations and harmful noise are included in the scope of delivery
- Finish: black piano lacquer
Main characteristics of SVS pc 4000 subwoofer
The active subwoofer SVS PC-4000 is manufactured in a cylindrical bass-reflex case. The PC-4000 is equipped with a 343 mm long-travel compressed cellulose low-frequency cone with a wide rubber surround directed to the floor. Built-in Class D amplifier power: 1200W continuous / 4000W peak. The subwoofer is controlled both with the installed application via Bluetooth and with the remote control. Overall dimensions (WxH): 419 mm x 1190 mm. Color: black piano lacquer.
The active subwoofer SVS PC-4000 is manufactured in a cylindrical bass-reflex case. The PC-4000 is equipped with a 343 mm long-travel compressed cellulose low-frequency cone with a wide rubber surround directed to the floor. Built-in Class D amplifier power: 1200W continuous / 4000W peak. The subwoofer is controlled both with the installed application via Bluetooth and with the remote control. Overall dimensions (WxH): 419 mm x 1190 mm. Color: black piano lacquer.
0 Comments