How To Sync LED lights With Music.
The best way to sync lights with music is to use RGB strip light with music sync enable.
but if you don't want to buy a new RGB light and want to use your old led strip light then here is the solution. this instructable will show you how to tie your led strip light to sync with bass (low frequency). it is not the best way to sync led lights with music, in the start I blow up my bulbs but now it's working perfectly and I'm using this setup for 2 years.
What Will You Need.
1.Led strip light
2.wire
3.an old amp
4.an audio signal (sub out)
normally led strip light comes in 12 volts dc power. and I recommend that you use 12 volts dc stip light because if you will use less than 12 volts dc led strip light or bulb it will blow because the low frequency has more than mid or high.in this setup, I am using 12 volts dc blue waterproof strip neon light.
you can use any wire no need of using high-quality wire.
at this point why I am saying old amp is because you don't want to blow your quite expensive amp right? using an old amp is better. you can use your old car amp in this setup I'm using a car amp.
connect your sub out to the old amp if you want to sync the led light with bassA Car Amp.
1 Comments
nice work man
ReplyDelete